Mobile Phone Repair

Google Pixel Back Glass Repair Cost in the UK: 2026 Prices and Advice

Stephanie S May 19, 2026

A cracked Pixel back can look like a small problem, until you see glass flakes on your hand or the camera starts catching dust. In most cases, the cost of repairing Pixel back glass in the UK in 2026 sits at about £40 to £99, with newer models usually costing more.

We’ve seen plenty of people leave it because the phone still works. That’s understandable. Still, once the rear panel is damaged, a simple repair can turn into a bigger one if moisture, dirt or a bent frame join the party.

What we usually see for Pixel back glass repair cost in 2026

If you want the short answer early, here it is: most Google Pixel rear glass repairs fall into three broad price bands. Older phones are often the cheapest. Mid-range and recent standard models sit in the middle. Newer flagships, especially ones with more complex camera housings, cost more.

This quick table gives the normal range we see across the UK market in 2026:

Pixel type	Typical UK repair cost	What usually affects it
Older models	£40 to £60	Simpler parts, lower labour time
Mainstream recent models	£60 to £80	Strong adhesive, tighter build
Newer flagship models	£80 to £99+	More delicate camera areas, harder part supply

The takeaway is simple: most repairs sit well below the price of a replacement phone, but exact quotes still depend on damage.

Google points owners towards its official Pixel repair help and the Google Store repair centre, which is useful if you want to check support routes. However, independent repair prices in the UK can still vary quite a bit. For example, a public Pixel 9 back glass repair example shows how some newer repairs can climb above the usual mid-range pricing.

That doesn’t mean every quote should be high. It means the model matters, the damage matters, and a proper inspection still matters most. When we quote for rear glass, we don’t only look at the crack itself. We check the frame, camera area, adhesive seal and whether the impact has shifted anything inside the handset.

Why one Pixel costs more than another

At first glance, back glass looks like back glass. In practice, two phones with similar cracks can need very different work.

A close-up view of a cracked glass smartphone back resting on a clean wooden workshop workbench.

The biggest factor is the model design. Some Pixel backs come away more cleanly. Others are bonded down hard, which means more heat, more care and more time. The camera bar also changes the job. If that area is damaged, the repair becomes more fiddly and the price can move up.

A second factor is hidden damage. We often find one of these after a drop:

a bent frame that stops the new glass sitting flush
cracked camera glass alongside the rear panel
damage around the charging coil area
tiny gaps that make resealing harder

If the frame is bent or the camera glass is cracked as well, don’t treat it as a cosmetic issue for long. Dust and moisture get in faster than most people expect.

Part supply also plays a role. Older Pixels can be cheaper to fix, but not always. Sometimes the phone is old enough that good-quality parts are less common. Meanwhile, newer models can cost more simply because the parts are newer and demand is higher. A recent Pixel 10 repair price example shows how even a single rear cover job can sit near £99 before any extra damage is added.

One more point matters, and it’s easy to miss. After any rear glass repair, we should treat the phone as splash-resistant at best, not factory-fresh waterproof. Good sealing helps, of course, but a repaired device isn’t the same as one that has never been opened.

When repairing the rear glass is worth it, and when it isn’t

Most of the time, rear glass repair makes sense if the phone still runs well, the cameras are fine and the frame is straight. That’s because the damage is then local to the back panel. You pay for a targeted repair, not a full rebuild.

Last week we had a Pixel 8 in from Chelmsford with a shattered rear panel after a car park drop. The owner assumed it was heading for the recycling bin. Once we checked it over, the screen, board and cameras were all fine. It only needed the back glass replaced and resealed. The final bill was nowhere near the cost of a new handset, and the phone went back into daily use with no drama.

Repair can be poor value when the crack is only part of the story. If the frame is twisted, the battery is swelling, the camera bar is damaged and the screen also needs work, the numbers change. In those cases, we compare the total cost against the phone’s age and resale value. Sometimes a repair still wins. Sometimes it doesn’t.

We see the same pattern across the wider mobile phone repair UK market. A cracked iphone screen repair often feels more urgent because the front affects every tap. Meanwhile, rear glass damage on a Pixel can look less serious, but it still weakens the phone. If you’re comparing iphone screen repair UK prices or checking iphone battery replacement UK quotes at the same time, the lesson is the same: model, parts and hidden damage set the real price. That also applies to samsung phone repair UK work.

For local readers, the decision often comes down to convenience as much as cost. People search phone repair Essex because they want a nearby option, but they also want a fair quote and a quick turnaround. If you’re local, our phone repairs in Essex page explains the mail-in and Harlow drop-in options. If you’re further away, a good postal service can be just as practical.

How our postal repair service works for Pixel rear glass jobs

A lot of customers assume posting a phone for repair is a faff. It doesn’t need to be. For many people, especially outside Essex, postal phone repair UK is the easiest route because you don’t lose half a day travelling.

We aim to keep it simple. You book the repair online, package the phone securely, include your order number and any passcode if the job needs testing, then send it in. Once it arrives, we inspect it and confirm the fault before work starts. In most cases, we aim to begin repairs as soon as the device lands with us, often the same day.

Before you post a Pixel with cracked rear glass, we suggest a few basic steps:

Back up the phone if it’s still working.
Remove the SIM if you don’t need it left inside.
Wrap the device well so loose glass can’t cause more damage.
Add your order details clearly inside the parcel.

We handle this kind of job the same way we handle our everyday iPhone and Samsung work, with express repairs, quality parts and a strong price promise. That matters because rear glass can look simple from the outside, yet the repair still needs proper heat control, careful cleaning and a clean seal on the way back together. We also provide a warranty on repairs, subject to terms.

If you’re weighing repair options across brands, remember that a Pixel rear panel job is often cheaper than a front-screen repair. That’s one reason many customers choose to fix it rather than live with sharp edges and an exposed back.

Final thoughts on Pixel back glass repair cost

If you’re trying to judge the right Pixel back glass repair cost, the sensible range for 2026 is usually £40 to £99, with newer flagships pushing higher. The phone’s model is only half the story, though. Frame damage, camera damage and part supply can move the quote up quickly.

The good news is that a cracked rear panel is often worth fixing if the rest of the phone is healthy. That’s true whether you’re booking locally in Essex or using our UK mail-in service.

If your Pixel back is smashed right now, you can book online, send it in securely and let us check it properly. We’ll tell you straight whether it’s a simple rear glass job or something more, and we’ll get it sorted as quickly as we can.

Blog Mobile Phone Repair, Mobile Phone Repairs, Phone Repair, Phone repair services

Pixel Wi-Fi Not Working After a Drop? UK Fixes That Make Sense

Stephanie S May 18, 2026

A dropped Pixel can look fine on the outside and still lose Wi-Fi the moment you need it. We see that a lot. One slip off the sofa, one knock onto paving, and suddenly the phone only connects near the router, keeps dropping out, or won’t switch Wi-Fi on properly at all.

If the problem started straight after the fall, we treat it as a likely hardware fault first. Sometimes a restart sorts it, but often the impact has shifted or damaged something inside. That is where a careful test saves time, money, and a lot of faff.

Why a drop can knock out Wi-Fi on a Google Pixel

A Pixel’s Wi-Fi system relies on more than one part. The antenna contacts, flex cables, frame pressure points, and board connections all have to stay lined up. A hard knock can upset that balance even if the screen hasn’t smashed.

In simple terms, the phone might still power on and do most things normally, but its wireless signal becomes weak or erratic. We’ve seen Pixels that only connect when sat next to the router. We’ve also seen phones where Wi-Fi and Bluetooth both go patchy after the same drop. That usually points to impact damage rather than a broadband issue.

You can spot similar reports on the Google Pixel Community and in an older XDA discussion about weak reception after a drop. The pattern is familiar: the timing matters. If the wireless trouble begins right after the phone hits the floor, that clue is hard to ignore.

Signs it’s probably hardware, not your router

This quick view helps us separate a simple glitch from a physical fault.

Symptom	Likely cause	Best next step
Wi-Fi only works close to the router	Antenna or connector issue	Internal inspection
Wi-Fi and Bluetooth both became weak after the fall	Shared radio path or board damage	Stop resetting, book a test
Wi-Fi toggle is greyed out or keeps failing	System crash or board fault	Restart, update, then diagnose
Problem began the same day as a drop	Impact damage inside the phone	Repair assessment

The main takeaway is simple. The more tightly the fault lines up with the drop, the less likely it is to be your broadband.

If Wi-Fi failed straight after impact, and Bluetooth is odd too, we assume a hardware issue until testing proves otherwise.

How we diagnose it without making things worse

The worst move is usually panic-resetting the phone five times and hoping it sorts itself. If the issue is physical, that won’t fix it. It can also waste time if you later need the device backed up before repair.

We start with the safe checks first, because not every Pixel needs opening.

A close-up view of a disassembled smartphone showing the motherboard, ribbon cables, and antenna connectors.

Safe checks to do at home

Restart the phone and router once. A one-off software wobble can happen after a shock.
Turn Wi-Fi and Bluetooth off, then back on. If both stay unreliable, that tells us more.
Test another network. Try home broadband and a hotspot. If both fail, the router isn’t the main suspect.
Check for visible damage. Look for frame dents, lifted screen edges, or a corner hit near the antenna side.

If Wi-Fi comes back and stays stable, great. If it drops again after a few minutes, the phone may have an internal connection issue that shifts with pressure or heat.

We also tell customers not to factory reset too early. A reset can help if Android settings got corrupted, but it won’t repair a loose antenna spring, a damaged flex, or a cracked solder point. Back up the phone first if you can. If you can’t keep a stable connection long enough, we would rather inspect it before you wipe anything.

Liquid changes the picture as well. If the phone was dropped outside in rain, or into water, weak wireless can come from corrosion rather than impact alone. That is why iFixit’s notes on poor Wi-Fi after liquid exposure are useful context. Corrosion can keep spreading, so waiting around rarely helps.

From our bench, the most common Pixel drop faults are:

antenna contacts no longer making firm contact
a flex connector jolted loose
frame damage changing how parts sit together
board damage, which is rarer but more serious

That last one is the expensive one. The good news is that plenty of Wi-Fi faults sit well below that level.

Repair, replacement, and what we recently saw in the workshop

Last week we had a Pixel 7 in from Essex. The customer said the phone slipped from a jacket pocket in a car park. The screen survived, which felt lucky at first, but Wi-Fi became poor the same day. It would find networks, then lose them within minutes.

After testing, we found impact-related internal damage rather than a software fault. Once the affected connection area was dealt with and the phone was rechecked, Wi-Fi stability returned. That sort of case is why we always tell people not to judge the damage by the glass alone.

When a repair makes sense

Repair usually makes sense when the phone still charges, boots, and works well apart from wireless issues. A newer Pixel is often worth saving if the fault is limited to the antenna path or a related internal part.

Replacement starts to make more sense when the phone has several problems at once. For example, if the frame is bent, the screen is damaged, and the board has taken a hit, the maths changes. We would rather say that plainly than push a repair that doesn’t stack up.

In the UK, prices can vary a lot because “Wi-Fi fault” is a symptom, not a single repair. Minor internal work and diagnosis cost far less than major board repair. We only give a firm quote once we know what has failed.

Our workshop isn’t Pixel-only, either. On a normal week we move from iPhone screen repair UK jobs and iPhone battery replacement UK bookings to cracked iPhone screen repair work, Samsung phone repair UK faults, and other mobile phone repair UK repairs. The testing mindset is the same across all of them. We find the real fault first, then we fix what needs fixing.

That matters because weak Wi-Fi can be misread. Plenty of phones get sold for parts when a sensible repair would have sorted them.

Getting it fixed in Essex or by post

Some people want local help fast. Others are nowhere near us and still want a proper diagnosis. We cover both.

A lot of customers first come looking for phone repair Essex support because they want a nearby team they can trust. If you’re local, you can arrange a drop-in appointment in Harlow. If you’re further away, our professional phone repair services also include a postal phone repair UK option, which works well for Pixels, iPhones, Samsungs, tablets, and other everyday faults.

The process is simple:

Book the repair online so we know what device and fault to expect.
Pack the phone securely and include your order number.
Add the passcode if testing needs it, otherwise we can hit delays.
Send it with tracked post, then we aim to start work once it arrives, often the same day.

We keep the quote clear, and we use quality parts where replacement parts are needed. We also back our work with a one-year warranty on many repairs, subject to terms. If you’ve already had one quote elsewhere, mention it. Our price promise means we’ll always try to match or beat like-for-like pricing where we can.

That approach suits business users too. If your work phone has lost Wi-Fi after a drop, being offline for days is more than annoying. It slows everything down.

Conclusion

When a Pixel’s Wi-Fi stops working after a drop, the simplest answer is often the right one. The fall probably caused a physical fault, even if the glass looks fine.

A few safe checks at home are worth doing first. After that, proper testing matters more than repeated resets. If you’re stuck with a flaky Pixel right now, you can book a repair online and send it in, or arrange a local visit if you’re near Essex. We’ll test it properly, quote clearly, and get it sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

Blog Mobile Phone Repair, samsung, Samsung Phone repair, Samsung Repair, Samsung Repair Service in UK, SAMSUNG REPAIRS

Samsung Bluetooth Not Working After a Drop? UK Fixes

Stephanie S May 17, 2026

Your Samsung can hit the floor once and seem mostly fine, then Bluetooth packs up an hour later. That catches people out all the time. Calls still work, Wi-Fi looks normal, but the car won’t pair and your earbuds keep dropping out.

The short answer is this: when Samsung Bluetooth isn’t working after a fall, it can be a simple software wobble, or it can point to hidden hardware damage. We’ve seen both. The good news is that you don’t need to guess for long if you check the right things first.

Why a drop can knock out Bluetooth

Bluetooth relies on more than one part working nicely together. The software manages pairing, the antenna sends and receives the signal, and small connectors inside the phone keep that path stable. A hard knock can upset any of them.

Sometimes the fall only scrambles saved connections. That’s the easy version. Your phone still sees devices, Bluetooth turns on, and a restart or re-pair sorts it. In other cases, the impact loosens an internal antenna contact, damages a flex, or causes a small fault on the board. Then the problem sticks around.

We’ve also seen phones that look spotless from the front, yet the corner impact has done enough inside to break wireless performance. Bluetooth is often one of the first things to act odd because the signal is low-power and easy to disrupt.

A cracked smartphone lies on a wooden workbench surrounded by precision repair tools.

If you’ve booked an iphone screen repair UK job before, you already know how obvious a cracked display fault is. Bluetooth isn’t like that. The damage can hide under the back cover, near the antenna path, or around the board where nothing looks wrong from the outside.

That is why we always treat “it was fine before I dropped it” as useful evidence. It helps us separate a random software issue from a fault caused by impact.

If your Samsung Bluetooth isn’t working, start with these checks

Before we call it a hardware problem, we run through a few basics. They take 10 minutes and can save you a repair bill.

Restart the phone and the accessory. It sounds basic, but temporary Bluetooth crashes do happen after a shock.
Turn Bluetooth off, wait 20 seconds, then switch it back on. Also toggle Airplane mode once.
Forget the device and pair it again. Corrupt pairing data is common after a glitch.
Test with a different accessory. If nothing connects, the phone is the likely culprit.
Reset network settings, if re-pairing fails. On Samsung, that can clear broken Bluetooth settings without wiping your photos.
Check battery optimisation if the issue is random disconnects, not total failure. Aggressive app management can break background Bluetooth behaviour, as explained in XDA’s guide to Bluetooth disconnects.

If you want the official basics, Google’s Android Bluetooth troubleshooting is still a good reference. We often point customers there before they send a handset in.

If Bluetooth won’t switch on at all, keeps spinning, or the phone sees no devices whatsoever, a drop-related hardware fault moves much higher up the list.

One more useful check is Safe mode. If Bluetooth works there, a rogue app may be interfering. If it still fails in Safe mode, the fault is more likely within the phone itself.

For anyone searching mobile phone repair UK options, this is the point where diagnosis matters more than guesswork. Swapping random parts won’t help if the issue sits on the board.

Clues the drop caused internal damage

A few symptoms make us suspicious straight away. Weak Bluetooth range is one. If your earbuds only stay connected when the phone is in your hand, the antenna path may have taken the hit. Another clue is patchy behaviour after pressure. We sometimes see phones that reconnect when the back is pressed lightly, then fail again in a pocket.

This quick table shows the sort of pattern we look for on the bench.

Symptom	Likely cause	Best next step
Bluetooth turns on, but won’t pair	Corrupt settings or pairing data	Reset and re-pair
Bluetooth keeps dropping at short range	Antenna or connector issue	Internal inspection
Toggle is greyed out or stuck	Hardware fault or board issue	Diagnostic repair test
Only one accessory fails	Problem with the accessory	Test another device first

The biggest takeaway is simple. Total Bluetooth failure after a drop rarely fixes itself.

Last week, we had a Galaxy S21 arrive from Essex after a pavement drop. The customer said music kept cutting out in the car, then Bluetooth vanished completely. The screen was intact, so they assumed it must be software. On inspection, we found impact damage near the antenna contact. Once we repaired that area and tested it properly, pairing came back as normal.

For customers looking for phone repair Essex support, this is the sort of fault we handle in Harlow every week. It’s also why a clean-looking phone can still need proper internal work.

Unlike a straightforward cracked iphone screen repair or an iphone battery replacement UK booking, Bluetooth faults don’t always reveal themselves at first glance. Diagnosis comes first, then the right fix.

When repair makes sense, and when it doesn’t

In most cases, repairing a Samsung with Bluetooth trouble after a drop makes sense if the phone is otherwise healthy. If the screen, battery, cameras and charging all work well, fixing the wireless fault is usually far cheaper than replacing the handset.

Common repairs include reseating or replacing antenna parts, correcting damage around connectors, or carrying out board-level work when needed. That’s why samsung phone repair UK quotes for Bluetooth faults are often confirmed after testing, not before. The fault can range from a loose contact to something deeper.

We take the same practical view with every device. If a phone already has a failing battery, smashed back glass, poor charge port and water exposure, the sums can stop making sense. In that case, we’ll say so. Nobody wants to throw good money at a handset that’s on its last legs.

That said, many impact faults are still worth sorting. A Samsung that’s only a couple of years old often has plenty of life left. With quality parts, proper testing and a price promise, repair is often the better call.

If you’re comparing options, our professional Samsung phone repair service is built around faults like this, not only obvious screen damage. We also back repairs with a warranty, subject to terms, which gives a bit of peace of mind after the job is done.

Posting your Samsung to us from anywhere in the UK

You don’t need to be local to get this sorted. Our postal phone repair UK service is ideal for faults that need bench testing, especially when Bluetooth works one minute and vanishes the next.

The process is simple:

Book the repair online, or message us if you’re not sure which option fits the fault.
Pack the phone securely, add your order number, and include any passcode we need for testing.
Send it in by tracked post. We aim to start work once it arrives, often the same day.
Once testing and repair are complete, we send it back securely.

If you want to get moving, you can book a Samsung phone repair online. If you’re still weighing up the best route, our trusted Samsung repair services across the UK page explains how we handle nationwide jobs.

We’re also available for local drop-ins by appointment in Harlow. So whether you need a samsung phone repair UK service by post or face-to-face help in Essex, we’ve got both covered.

Conclusion

A dropped phone can cause more than a cracked corner. When Samsung Bluetooth isn’t working after impact, the fault may be small, but it still needs proper testing. The early checks are worth doing, yet stubborn pairing failures, weak range or a dead Bluetooth toggle usually point to internal damage.

We’ve seen plenty of phones recover with the right repair, even when the outside looks fine. That’s why it’s worth diagnosing before writing the handset off.

If your Samsung is still refusing to pair, you can book it in and send it to us, or bring it to our Essex workshop. We’ll test it properly, explain the fault clearly, and get it sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

Blog apple repair, Apple Repair Service, iPhone Repair, iPhone repairs, Mobile Phone Repair, Phone Repair, Phone repair services, Screen Repair

iPad Not Turning On After a Drop? UK Checks That Matter

Stephanie S May 16, 2026

An iPad that hits the floor and then stays black feels expensive, fast. If your iPad isn’t turning on after a drop, don’t assume it’s finished.

In our workshop, we often find a simpler fault first. Sometimes the screen has failed, while the tablet itself is still alive. Other times, the battery connection, charging port, or internal board has taken the hit.

The key is to do a few safe checks, then stop before home testing turns a repairable fault into a bigger one.

What to check when an iPad isn’t turning on after a drop

Start with the basics, because a hard drop can mimic a flat battery or frozen system. We know that sounds odd, but it happens more than people expect.

First, plug the iPad into a known-good charger and cable. Leave it alone for at least 30 minutes. If the battery was already low before the drop, the impact may have pushed it over the edge. Apple also says some iPads need longer before they show signs of life, so their UK guide for an iPad that won’t turn on is worth keeping handy.

A quick symptom check helps narrow things down:

What you notice	What it often means	What to do next
No sound, no vibration, no charge symbol	Flat battery, charging fault, or board issue	Try another plug, cable, and charger, then force restart
It makes sounds but the screen stays black	Display damage or loose connector	Stop testing and get it checked
The glass is cracked and the frame is bent	Impact damage inside the housing	Avoid pressing on the screen
It shows the Apple logo, then dies	Start-up fault or deeper hardware issue	Force restart, then seek diagnosis if it repeats

After charging, try a force restart. The button sequence depends on the model, so Apple’s force restart iPad guide is the safest reference.

A few more home checks are fine:

Look at the frame edges for bending, especially near the corners.
Check the charging port for fluff, dust, or a pin that looks out of line.
Listen for sounds or haptics when you plug it in.
If it connects to a computer but shows no picture, the screen may be the real problem.

When to stop trying things at home

If the iPad gets hot, smells odd, or shows a swollen screen, stop charging it. The same goes for a badly bent frame. Pushing on the glass or trying to prise it open usually makes the next repair harder.

A black screen after a drop doesn’t always mean a dead iPad, but repeated button mashing won’t fix impact damage.

At that point, a proper inspection is the sensible move.

What the drop may have damaged inside

The obvious damage is the glass. The less obvious damage is often the one that stops the iPad powering up, or makes it look dead.

A technician sits at a workshop bench examining a tablet with a cracked, non-responsive screen.

Inside an iPad, a drop can affect the display assembly, battery connector, charging port flex, power button line, or the logic board itself. A corner hit is often the worst. The force travels through the frame, and a slight bend can stress connectors and solder joints.

We regularly see iPads with a cracked top glass, but the real failure is underneath. In other cases, the glass looks almost fine and the LCD panel has failed. That leaves the device on, but with no visible image. If you want a simple explanation of layers and panels, our guide to understanding Apple display and LCD repairs clears that up without the jargon.

Screen fault or board fault?

There are a few clues. If the iPad still makes charging sounds, connects to a computer, or responds to button presses, the screen is a strong suspect. If there is no sign of life at all, the fault may be deeper, although a flat battery can still muddy the picture.

Board damage tends to follow a heavier hit. We also see it more on older iPads, where the battery and connectors have already had years of wear. That doesn’t mean it’s beyond repair, only that it needs proper testing rather than guesswork.

A workshop example we saw in Essex

Recently, we had a 9th generation iPad in from Essex after a kitchen-tile drop. The customer said it “wouldn’t turn on at all”. The front glass had one corner crack, but the main clue was that it still chimed when connected to charge.

In that case, the tablet wasn’t dead. The display assembly had failed from the impact, while the rest of the device was still working. Once we replaced the damaged screen and tested the internals, it came back to life with no drama. That sort of job is far more common than people think.

The pattern isn’t limited to tablets either. On a normal bench day, we’re handling all sorts of mobile phone repair UK work alongside iPads. That can mean iphone screen repair UK bookings, cracked iphone screen repair on a newer model, iphone battery replacement UK requests, and samsung phone repair UK jobs on the mat next to a dropped tablet. For local customers looking for phone repair Essex support, that’s the mix we see most weeks. If you’re further away, our postal phone repair UK service covers the same careful process.

The main lesson is simple. Don’t judge the fault by the outer crack alone. A small crack can hide a bigger issue, and a horrible-looking screen can still mean a straightforward repair.

When a repair makes sense, and what it may cost in the UK

A dropped iPad is often worth fixing if the fault is limited to the screen, battery connection, charging port, or another single part. That’s especially true if the tablet still does what you need and the rest of it is in good shape.

Costs vary by model, because parts vary wildly. As a broad guide, iPad screen repairs in the UK often start around £120 and can rise to £400 on newer or more complex models. Internal fault diagnosis may lead to a different quote, especially if the frame is bent or the board has taken damage. For a rough idea before you book, our current iPad screen repair prices in the UK are a useful starting point.

We’d rather give a straight answer than push a repair that doesn’t add up. If an older iPad needs a screen, board work, and a battery, replacement may make more sense. On the other hand, if it’s a recent model with one clear impact fault, repair is usually the better value.

That is where a proper diagnosis matters. We use quality parts, we work with a price promise, and we include a warranty on repairs, subject to terms. So you’re not paying for a shrug and a guess.

When replacement may be the smarter option

We normally say replacement is worth considering when the housing is badly twisted, the battery is swelling, or there are multiple major faults. Water exposure alongside a drop also changes the picture.

If the iPad holds important photos, schoolwork, or business files, repair still has another benefit. It may be the quickest route to getting your data back, even if you replace the device later.

If you’re outside Essex, our postal repair service is straightforward

Not everyone can drop in locally, so we keep the mail-in process simple. If your iPad won’t turn on after a fall and you want us to check it, you can book online and send it in securely.

We suggest this:

Book the repair online with the right model if you know it.
Pack the iPad well, with padding around all sides.
Add your order number, fault details, and passcode if testing will need it.
Send it with tracked post, then keep the proof of postage.

Once it arrives, we aim to start diagnosis quickly, often the same day. If the fault is different from what you expected, we’ll tell you before moving ahead. That keeps things clear and avoids nasty surprises.

If the iPad still powers on now and then, back it up first. Also, don’t post chargers, cases, or extras unless they relate to the fault. The less clutter in the parcel, the better.

A dropped iPad that won’t turn on needs calm checks, not guesswork

When an iPad goes black after a drop, the safest first move is simple. Charge it, force restart it, and look for signs that the screen has failed rather than the whole device.

If those checks don’t wake it up, the next step is a proper diagnosis. That’s usually the fastest way to sort the fault, protect your data, and avoid spending money in the wrong place.

If you’re stuck with an iPad not turning on right now, send us the model and symptoms or book it in online. We’ll give you a straight answer and get it sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

Blog apple repair, Apple Repair Service, iPhone Repair, iPhone repair service, iPhone repairs, Mobile Phone Repair, Phone Repair, Phone Repair Essex, Repair iPhone, repair iPhone water damage

iPhone Face ID Unavailable After Water Damage: UK Fixes

Stephanie S May 15, 2026

Your iPhone can look fine after a splash, then suddenly stop recognising your face. If you’ve got an iPhone Face ID unavailable message after water damage, the fault is often small, hidden, and time-sensitive.

We see this a lot in Essex and through our UK post-in bookings. The good news is that the phone isn’t always finished, but the wrong next step can make the repair harder. The first aim is to stop more damage, then find out whether the Face ID parts are still recoverable.

When iPhone Face ID is unavailable after water damage

If Face ID stops working after rain, a sink drop, or a spill, water has usually reached the top sensor area. That part of the phone houses the TrueDepth system, which helps your iPhone map your face. It doesn’t take much moisture to upset it.

In some cases, the phone will still charge, ring and use apps. That’s what catches people out. They assume the handset is mostly fine, keep using it, and corrosion quietly spreads around the top flex cables or board connectors.

Apple’s own Face ID troubleshooting steps are worth trying first. A restart, camera check and software update can rule out a simple glitch. Still, if the problem started right after liquid exposure, software is rarely the whole story.

We usually look for a few clues at the same time. Face ID failure often turns up with a muffled earpiece, a dim front camera, ghost moisture under the display, or odd battery drain. Sometimes the phone says Face ID is unavailable straight away. Other times it appears a day later, once trapped moisture has had time to do its worst.

That’s why speed matters. Water damage is less about the splash itself and more about what happens next on the inside.

What to do before corrosion spreads

The first hour makes a big difference. A wet phone doesn’t need luck, it needs less power running through damp circuits.

Turn the iPhone off if you can.
Don’t charge it, even if the battery is low.
Remove the case and dry the outside with a soft cloth.
Keep it upright in a dry place with airflow.
Arrange a proper inspection as soon as possible.

We don’t recommend rice. It makes people feel better, but it doesn’t remove moisture from under shields or around tiny connectors. In the workshop, we need controlled drying, inspection and cleaning, not cupboard folklore.

Even a simple iFixit discussion on liquid damage gets one key point right: stop charging and stop testing it over and over again. Each power cycle can make a borderline fault worse.

If Face ID failed after a splash, don’t keep trying to set it up again every few hours. Repeated charging and use can turn a recoverable fault into a board-level repair.

Backing up the phone matters too, if it’s safe to do so and the device still works normally. If the handset is warm, glitchy or showing signs of deeper damage, leave it alone and get advice first. We would always rather inspect a phone early than see it a week later with green corrosion spread across several areas.

Why water knocks out Face ID first

Face ID is one of the fussiest parts of an iPhone. The system relies on several components working together, including the front camera, dot projector, flood illuminator and earpiece area. Some of those parts are security-paired to the logic board, so a simple swap isn’t always an option.

The intricate internal sensors and camera array of a smartphone are exposed on a professional repair bench.

We often see liquid enter through the earpiece speaker mesh at the top of the screen. That route is small, but it leads straight towards delicate Face ID hardware. On newer iPhones, even a brief soak can leave residue on connectors or cause damage that shows up later.

A recent job from the bench

Not long ago, we had an iPhone 12 sent in from Chelmsford. The customer said it had slipped into a sink for a second, then worked fine apart from Face ID. By the time it reached us, the earpiece was faint and the front camera had started to mist.

After opening it, we found corrosion around the top assembly. We cleaned the affected areas, checked the connections and carried out full testing. In that case, the paired Face ID parts were still salvageable, so we restored the function without replacing the whole handset. That’s the best-case outcome, and it usually depends on how quickly the phone gets checked.

We also see the opposite. If the paired sensor has failed outright, Face ID may not come back, even though the rest of the phone can still be repaired and used. That’s why honest diagnosis matters more than hopeful guesswork.

Repair, replace, or live without Face ID?

Most people want the straight answer: is it worth fixing? Usually, yes, if the phone is still in good shape and the damage is caught early. If the device is older, badly corroded, or already had other issues, the maths can change.

This is also where related faults come into play. Many customers come to us after searching for “iphone screen repair UK”, “iphone battery replacement UK”, or “cracked iphone screen repair”, then realise the bigger issue is the water that got inside after the drop. A cracked display and Face ID failure often travel together.

If your iPhone has taken a knock as well as a splash, our complete guide to iPhone screen repair can help you understand the display side of the job. If the handset has several faults at once, it also helps to read can a broken iPhone be repaired before spending money twice.

These are typical price ranges we discuss in the UK, but exact quotes depend on the model and what testing shows:

Situation	Likely work needed	Typical UK price range
Face ID fault after minor splash	Diagnostic, clean, connector and top assembly checks	£45 to £95
Water damage with partial recovery	Cleaning, testing, part-level repair where possible	£80 to £180
Liquid damage plus screen fault	Water-damage work and screen repair	£120 to £280+
Older iPhone with heavy corrosion	Board work may be uneconomical	Quote after inspection
Battery also affected	Add battery replacement if needed	£45 to £95

The big takeaway is simple. A quick inspection is cheap compared with replacing a good phone too soon. We offer a price promise, use quality parts where replacement is needed, and our repairs come with a one-year warranty on covered work and parts, terms apply.

Local in Essex, or post it from anywhere in the UK

For anyone searching “phone repair Essex”, speed matters. We offer local repairs in Harlow by appointment, and we also handle a lot of “postal phone repair UK” jobs for customers who can’t get to us in person.

The process is straightforward. Book online, pack the phone securely, include your order number and any needed passcodes, then send it in. Once it arrives, we aim to start diagnostics quickly, often the same day. That’s useful when you need mobile phone repair UK options without spending a day travelling.

We don’t only work on iPhones either. People often find us through “samsung phone repair UK” searches, and liquid damage behaves in much the same stubborn way across brands. The difference is that iPhone Face ID has paired security parts, so the repair path needs extra care.

If we can save it, we’ll tell you. If the repair doesn’t stack up, we’ll tell you that as well. That’s how it should be.

Conclusion

When an iPhone shows Face ID as unavailable after water damage, the best fix starts with speed, not guesswork. The sooner we inspect and clean it, the better the chance of saving the phone and the secure sensor system.

Some handsets recover fully. Others don’t. What matters is getting a proper diagnosis before corrosion spreads and turns a manageable repair into a write-off.

If your phone is in that awkward half-working state right now, book it in online or send it through our post-in service and we’ll give you a clear answer, fast.

Blog Mobile Phone Repair, Phone Repair, Repair my phone, repair phone near me

Google Pixel Water Damage in the UK: What to Do First

Stephanie S May 11, 2026

Your Pixel falls into a sink, a puddle, or the loo, and the panic starts straight away. With Google Pixel water damage, the first few minutes matter far more than any late-night forum hunt.

The short answer is simple. Turn it off, keep it off, dry the outside, remove the case and SIM, and don’t charge it. Then give it time to dry and get it checked if anything looks off.

At Repair My Crack, we see this in Essex and through our UK post-in jobs all the time. A wet phone isn’t always dead, but the wrong next step can finish it off.

The first steps after Google Pixel water damage

If your phone has only just got wet, stay calm and do these in order:

Power it off straight away.
If it’s still on, switch it off. If it’s already off, leave it off.
Take off the case and remove the SIM tray.
Water loves getting trapped around the frame and ports. A case can hold moisture in place.
Blot the outside with a soft cloth.
Don’t scrub. Gently dry the screen, edges, camera area, speaker holes and charging port.
Hold it with the ports facing down.
A light movement can help any loose water escape. Don’t shake it like mad.
Leave it in a dry room at normal temperature.
Put it on a flat surface with some airflow. Don’t put it on a radiator, in the airing cupboard, or under a hair dryer.

Turn the phone off, keep it off, and don’t plug it in.

That last point matters more than most people realise. Electricity and moisture are a bad mix. A Pixel can survive the water, then die when someone tries to “see if it’s okay” by switching it back on.

Google’s own Pixel water-damage guidance says much the same, and it’s worth noting one detail from them: water resistance drops over time. A phone that handled rain last year might not shrug off a sink full of water today.

Close-up of sleek smartphone lying flat on white microfiber cloth in soft daylight.

The mistakes that make a wet Pixel worse

We still hear the same rescue ideas every week, and a few of them do more harm than good.

Rice isn’t a repair plan. It doesn’t remove moisture from under shields and connectors, where the real trouble starts. It can also leave dust in the charging port. If you want a deeper technical explanation, this Pixel water-damage recovery guide explains why trapped moisture inside the phone is the bigger issue.

Heat is another common mistake. Hair dryers, radiators and ovens can warp seals, weaken adhesive and push moisture deeper into the handset. That’s a bit of a nightmare when the phone might have been recoverable with careful handling.

Charging too soon is the big one. Even if the screen still works, don’t plug it in “for a second”. USB-C pins are close together, and liquid around the port can cause a short. The same goes for wireless charging, which still wakes the phone and encourages power to move through damp parts.

We’d also avoid repeated button pressing. People often keep trying the power button, volume buttons and fingerprint area. That can move water around and give the phone more chances to fail.

If the phone was exposed to rain for a few minutes, you may get lucky. If it took a proper dunking, assume moisture got further in than you think.

What we find on the bench after liquid damage

A lot of water-damaged Pixels look fine at first. Then the real symptoms show up later. Charging stops. The screen flickers. Cameras mist up. The earpiece sounds muffled. Sometimes the battery drains like mad for no clear reason.

That’s because corrosion doesn’t wait politely. Moisture starts reacting with metal contacts, and that damage can keep spreading after the phone feels dry on the outside.

Recently, we had a Pixel 7 in from Essex that had spent only a few seconds in a kitchen sink. The owner did one thing right, they switched it off fast. Still, charging failed the next morning. Once opened, there was moisture around the charging assembly and the early signs of corrosion. After cleaning, testing and replacing the affected charging part, the phone was back up and stable. A few more hours of being switched on might have turned that into a much bigger repair.

Repair technician examines disassembled mobile phone internals on workbench in clean workshop.

Signs your Pixel needs proper inspection

A professional check makes sense if you notice any of these:

The phone won’t charge, or charging cuts in and out.
The screen shows lines, dim patches or touch problems.
Speakers, microphones or cameras stop working properly.
The phone gets warm when idle.
There’s fog under the camera lens or screen.

At that point, drying time alone usually isn’t enough. On the bench, we inspect the internals, clean affected areas, test the battery and charging path, and replace failed parts if that’s the sensible fix. We don’t guess. We check what still works and what doesn’t.

Repair options in Essex and across the UK

If you’re local, we offer booked-in repairs in Harlow, which suits anyone searching for phone repair Essex without wanting the faff of a long trip. If you’re further away, our postal phone repair UK service is there for the same reason, quick help without needing a local specialist.

Here’s the simple difference:

Option	Best for	What happens
Drop-in by appointment	Essex customers who want a local handover	We book it in, inspect it, and aim to start quickly
Postal repair	UK customers outside the area	You book online, pack it securely, and send it tracked

If you’re posting the phone to us, include your order number and any passcode we need for testing. Use decent padding, send it tracked, and don’t post it switched on. We aim to start work as soon as it arrives, often the same day, and we’ll tell you plainly what we’ve found.

Because liquid damage can affect more than one part, exact pricing depends on the fault. A charging-port issue is one thing. Main-board damage is another. That’s why a proper diagnosis matters before anyone throws numbers around. We also back our work with a warranty on eligible repairs, and our price promise helps if you’ve already had a quote elsewhere.

If you need advice before sending it, you can contact our repair team and we’ll point you in the right direction.

The same rules apply to iPhones and Samsungs

Although this guide is about Pixels, we use the same first-aid advice across most phones. People often come to us after searching for iPhone screen repair UK, iPhone battery replacement UK, cracked iPhone screen repair, Samsung phone repair UK, or broader mobile phone repair UK help.

The faults are different, but the pattern is familiar. A cracked screen usually needs a display replacement. A worn battery needs testing and replacement. Water damage is trickier because the problem can spread after the first splash. That’s why quick action matters more here than it does with a simple glass break.

If you’re dealing with an Apple handset instead, our iPhone water damage repair service explains the process in the same plain language.

Conclusion

When a Google Pixel suffers water damage, speed matters more than luck. Switch it off, dry the outside, leave it alone, and don’t charge it until it’s had proper time to dry or a technician has checked it.

We’ve seen plenty of wet phones come back fine, and we’ve also seen good phones ruined by one extra press of the power button. That’s the bit to remember.

If your Pixel has taken a swim and you’re stuck, book it in and we’ll tell you straight what it’s likely to need, with no drama and no guesswork.

Blog Mobile Phone Repair, Phone Repair, samsung, Samsung Repair, Samsung Repair Service in UK, SAMSUNG REPAIRS

Samsung Overheating in 2026: UK Causes, Warning Signs and Fixes

Stephanie S May 10, 2026

A Samsung that feels a bit warm after charging or a long video call is common. A Samsung that gets hot in your pocket, slows to a crawl, or shuts itself off is a different story.

In 2026, we are seeing more Samsung overheating complaints across the UK. Some are simple, like heavy apps or a dodgy charger. Others point to a tired battery or another hardware fault. The key is spotting the difference early, before heat starts knocking the life out of the phone.

When a warm Samsung becomes a real problem

Most Samsung phones run warm at times. Fast charging, wireless charging, gaming, sat-nav, 4K video, and long video calls all push the processor and battery harder. Samsung says as much in its UK guide to warm Galaxy phones.

What we worry about is heat during light use. If your phone gets hot while messaging, scrolling, or sitting on charge with the screen off, that’s not something we would brush off. The same goes for random restarts, sharp battery drops, charging pauses, or the back panel starting to lift.

If the phone gets hot during light use, or stays hot long after charging stops, we treat that as a fault.

There are a few red flags that mean stop charging it and get help. One is a swollen battery, which can push the screen or rear cover away from the frame. Another is a hot charging port with a burnt smell. If either shows up, leave the phone off until it has cooled.

Heat also builds faster in summer. Samsung notes that phones work best in a sensible temperature range, and hot cars or direct sun can tip a normal device into trouble. If yours overheats only on bright days, the fault may still be real, but the weather is helping it along.

What’s causing Samsung overheating in 2026

The biggest change we are seeing this year is workload. Newer Galaxy phones handle more AI-heavy features, bigger camera processing, and more background syncing than older models. Right after setup or a large update, they often run warmer for a while because the phone is indexing photos, restoring apps, and pulling data in the background.

Charging is still one of the top causes. Cheap plugs, damaged cables, and using the phone hard whilst charging all create extra heat. Fast charging is handy, but it isn’t gentle. Wireless charging adds even more warmth because energy transfers through the pad instead of a cable.

Samsung Galaxy S26 overheats on living room desk, back panel glowing with heat haze, screen showing battery and temperature warnings, hand hovering nearby.

Signal is another sneaky one. On trains, in rural areas, inside warehouses, or in thick-walled buildings, the phone works harder to hold a connection. That extra radio activity creates heat and drains the battery at the same time. Add a thick case and a warm dashboard, and the phone has nowhere to dump that heat.

Battery wear matters too. Once a lithium-ion battery ages, it becomes less stable under load. The result is familiar in the workshop: heat, poor battery life, lag, and sudden shutdowns. Samsung’s advice for phones in hot weather lines up with what we see every week, especially when people charge in direct sun or leave the phone in a car.

How we diagnose the fault before replacing parts

We don’t start by swapping parts and hoping for the best. First, we try to pin down when the heat appears. That tells us a lot.

If your Samsung is running hot, these are the first steps we recommend:

Unplug it and take the case off.
Let it cool on a table for 15 to 20 minutes.
Close heavy apps, then restart the phone.
Test with a proper Samsung charger or a known good USB-C cable.
Check battery use and updates in Device Care.

Don’t put it in the fridge. Sudden cold can cause condensation, which only adds another problem.

A quick fault pattern often points us in the right direction:

What you notice	Likely cause	What we usually check
Hot only during fast charging	Charger, cable, port, or battery wear	Charging test, port condition, battery health
Hot on video calls or maps	Heavy load, poor signal, warm room	App use, signal strength, case, settings
Hot during light use	Battery fault or stuck background process	Battery, software, recent updates
Hot with back lifting	Swollen battery	Stop charging, inspect battery urgently

The takeaway is simple. If the phone cools down once the load stops, it may be a settings issue. If it keeps heating up during normal use, it needs proper diagnosis. That’s when a Samsung phone repair service makes more sense than endless restarts.

A recent workshop case from Essex

A recent job sums this up well. We had a Galaxy S23 in from Essex that got roasting during charging and dropped from 38% to 9% in under an hour. The owner had already tried clearing apps and turning off fast charging, but the phone still ran hot on basic use.

We tested it with a known good cable and charger, then checked the charging behaviour and battery response. The battery was the real problem. It was no longer handling load properly, so it heated up fast and dragged the rest of the phone with it. After a Samsung battery replacement service, plus a clean-up and retest, the handset charged normally and stopped throttling.

Gloved hands replace battery in disassembled Samsung Galaxy on anti-static mat with screwdriver nearby.

That sort of repair is common. In a normal week, alongside samsung phone repair UK bookings, we also handle iphone screen repair UK jobs, iphone battery replacement UK requests, and the odd cracked iphone screen repair after a nasty drop. Different brands, same rule: diagnose first, then replace only what has failed.

Repair, replacement, and getting your phone sorted in the UK

In many cases, fixing an overheating Samsung is worth it. A battery fault or charging issue is often far cheaper than replacing the whole handset, especially if the screen and cameras are still fine. As a rough guide, battery work often lands around £59 to £99, while charging-related repairs can sit around £49 to £89. Exact quotes depend on the model and the fault we confirm on the bench.

There are times when we tell people to pause. If the phone has heat damage, liquid damage, frame damage, and a worn battery all at once, the bill can climb quickly. Across the wider mobile phone repair UK trade, premium Samsung parts are still pricey in 2026, especially on newer OLED models.

For local customers searching for phone repair Essex, our Essex phone repairs service is the easy option. If you’re elsewhere, our postal phone repair UK service is usually less of a faff than people expect. We ask customers to book online, back up the device, pack it well, include the order number, and add any needed passcode so we can test the repair properly. Our postal phone repair UK guide for Samsung walks through the packing side.

We aim to start work as soon as the phone arrives, often the same day. We also back repairs with quality parts, a price promise, and warranty cover where it applies. For prevention, Samsung’s own steps to reduce overheating are worth a look, especially if you want to cut background activity and tame fast charging.

Conclusion

A warm phone is normal now and then. A Samsung that keeps overheating during everyday use usually needs attention before the battery, screen, or charging system gets worse.

If settings tweaks and a better charger don’t calm it down, the next step is a proper check. We can help whether you need a local booking in Essex or a secure postal repair anywhere in the UK.

If your phone is running too hot right now, book it in and we’ll get it checked, priced, and sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

Blog Mobile Phone Repair, Phone Repair, Phone repair services, phone repairs near me, Professional Samsung Phone repair, Repair my phone, repair phone near me, samsung, Samsung Phone repair, Samsung Repair, Samsung Repair Service in UK, SAMSUNG REPAIRS

Samsung Volume Buttons Not Working After a Drop? UK Fixes

Stephanie S May 9, 2026

You drop your Samsung, pick it up, and the screen still lights up. Then you press the volume key and nothing happens. That small fault can be more annoying than a cracked screen, because you notice it all day.

If your Samsung volume buttons are not working after a drop, the cause is usually physical. In most cases, the button has jammed, the side frame has bent, or the internal button flex has taken the hit. The good news is that many of these faults are repairable without replacing the whole phone.

The short answer when Samsung volume buttons stop working

We see this fault a lot in the workshop. A drop doesn’t always smash the display. Sometimes it lands on the phone’s edge, and the impact goes straight into the side buttons.

That means the first job is to work out whether the fault is software or hardware. Samsung’s own key troubleshooting guide is worth checking, because it covers case pressure, diagnostics, and settings resets before you spend money.

Most of the time, though, a dropped phone with dead volume keys has a hardware problem. If the button feels loose, sunken, overly stiff, or stuck down, we treat that as physical damage until proven otherwise.

A jammed volume-down key can also trigger odd behaviour. On some models, it can keep changing the sound level, boot into Safe Mode, or stop you using normal shortcuts. That’s why it helps to test the phone early, before the fault gets worse.

Why Samsung volume buttons stop working after a drop

The volume rocker looks simple from the outside, but there’s a bit going on under that tiny strip of metal or plastic. On many Galaxy models, the outer button presses a small internal flex cable switch. A drop can upset that setup in a few ways.

Sometimes the frame takes a knock and pinches the rocker. The button is still there, but it can’t travel properly. Other times, dust or grit gets shoved into the gap on impact, which leaves the button feeling sticky or dead. We also see buttons that have shifted out of line, especially when the side of the phone lands first.

Close-up side view of Samsung Galaxy phone with cracked volume buttons and housing on workshop bench with tools.

Even a small dent around the rocker can stop the button from moving properly.

On newer models, the outside can look fine whilst the internal switch has torn or detached. That’s common on phones that hit paving, concrete, or the corner of a table. We also see combo damage, where the button fault comes with a cracked back glass, lifted screen, or bent frame.

If the button feels sunken, loose, or permanently pressed, stop forcing it. Extra pressure can turn a simple button repair into a bigger frame job.

Safe checks to try before booking a repair

There are a few things we suggest before opening the phone. Keep them gentle. If you start digging at the button with a pin, you’ll likely make it worse.

Remove the case and test the buttons again. Some cases press on damaged keys and make the fault look worse.
Inspect the side of the phone in good light. Look for dents, gaps, or a button sitting lower than it should.
Restart the phone. If needed, do a forced restart with the side key and volume-down combination for your model.
Open Samsung Members and run the button test if your phone still responds normally.
Wipe the button area with a dry soft brush or cloth. If you use isopropyl alcohol, use a tiny amount on the cloth, not sprayed into the phone.
Use the on-screen volume slider for now, then back up your data.

We also tell customers to check accessibility settings, because a shortcut can change how the keys behave. If the phone started acting strangely after the fall, a settings reset can help rule software out without wiping your data.

If you want another view on model-specific faults, this Galaxy S23 button repair guide explains why the internal flex often needs replacing after an impact.

What we don’t recommend is prising the button out, squeezing the frame back by hand, or pouring cleaning fluid into the gap. That might work once, but it often turns a tidy repair into a mess.

How we fix it in the workshop

Once the phone reaches us, we test the button feel first. That tells us a lot before the handset is opened. A click with no response points one way. No click at all points another. If the frame is dented, we check whether the rocker is being trapped by the housing.

Two hands replace flexible flat cable on Samsung phone volume button, tools and new part visible in clean workshop.

Most proper fixes involve opening the handset and replacing the damaged button assembly or flex.

On many Samsung models, the repair involves removing the back glass, disconnecting the battery, and replacing the side button flex or the button cap itself. If the frame has bent, we may also need to correct that area so the new part doesn’t bind. After that, we run button tests, audio checks, and general function checks before the phone goes back.

A recent repair from the bench

Last week, we had a Galaxy S23 sent in from Essex. The owner said the screen survived the fall, but volume-down had stopped completely. Once opened, the fault was clear. The side frame had taken a tiny knock, and the internal flex had split. We replaced the part, checked the rest of the handset, and sent it back working properly. It was a small repair, but only because the customer stopped pressing the damaged key.

That part matters. The sooner a stuck button is checked, the better the chance of keeping the repair simple.

Typical UK repair costs in 2026

Prices vary by Samsung model, part availability, and how much impact damage sits around the button. This quick guide shows the ranges we usually see across the UK.

Repair type	Typical UK price	When it fits
Clean and free a jammed button	£20 to £40	Grit or minor sticking, no torn parts
Replace the button flex or rocker parts	£60 to £120	The most common post-drop repair
Frame or side housing work	£100 to £250	The phone edge is bent or pinched
Screen and button repair together	£200 to £400	The fall damaged multiple parts

For many A-series and S-series phones, a button repair still makes sense. For an older handset with a bent frame, weak battery, and cracked screen, the maths can change. In those cases, we’ll say so plainly.

We also keep our price promise in mind. If you’ve had a like-for-like quote elsewhere, ask us about it. We use quality parts, our accredited technicians carry out the work, and repairs come with a one-year warranty on eligible work, subject to terms.

Local in Essex or post-in from anywhere in the UK

Because we run a mobile phone repair UK service, we see this fault from all over. Some customers book local drop-ins. Others send devices in because the nearest shop can’t handle Samsung internals properly.

If you’re looking for phone repair Essex, we offer Harlow appointments as well as post-in jobs. For Samsung-specific faults, our Samsung phone repair Essex booking page is the quickest place to start. We also cover the wider UK through a postal phone repair UK service, and we aim to start work as soon as the handset arrives, often the same day.

Alongside samsung phone repair UK bookings, we handle iphone screen repair UK jobs, iphone battery replacement UK requests, and plenty of cracked iphone screen repair work. The same drops that kill a Samsung volume key often leave an iPhone with switch or screen damage. If your Apple handset has taken a similar knock, our guide to iPhone button repair after a drop may help.

When you post a phone in, pack it securely, include your order number, and add any needed passcode so we can test it properly. That keeps things moving and cuts down on delays.

Conclusion

If your Samsung volume buttons are not working after a drop, don’t write the phone off straight away. Most cases come down to a jammed rocker, a damaged flex, or a bent frame around the button.

Try the safe checks first, back the phone up, and stop pressing a key that feels wrong. If it still won’t respond, we can test it properly, quote it clearly, and get it sorted with express repairs, quality parts, and sensible advice.

If you need help, book online and send the phone in, or arrange a local visit in Essex. We’ll take a proper look and tell you the truth about whether it’s worth repairing.

James Waterston, Device Repair Specialist at Repair My Crack

featured-google-pixel-battery-replacement-cost-in-the-uk-20-1393155b

Blog Mobile Phone Repair, Mobile Phone Repairs, phone battery replacement, Phone Repair, Phone repair services

Google Pixel Battery Replacement Cost in the UK, 2026 Repair Guide

Stephanie S May 5, 2026

A Pixel that drops from 40% to dead before lunch is a bit of a nightmare. In the UK, the Pixel battery replacement cost in 2026 usually lands between £49 and £99, depending on the model, the parts used, and whether anything else needs attention.

That range is still far cheaper than replacing the whole phone. Most of the time, the smart move is getting a proper quote, checking what’s included, and avoiding the suspiciously cheap option.

Pixel battery replacement cost in the UK, by model

As a rough guide, this is where most UK pricing sits in May 2026. If you want Google’s own route, their UK repair centre is the obvious starting point.

Here’s the quick comparison:

Pixel model range	Typical UK battery replacement cost	What usually affects the price
Pixel 5, 6, 6a	£49 to £69	Older parts, easier market pricing, part availability
Pixel 7, 7 Pro, 7a	£69 to £79	Strong demand, moderate labour time
Pixel 8, 8 Pro, 8a	£79 to £89	Higher parts cost, more careful resealing
Pixel 9 series	£89 to £99	Newer parts, higher stock and labour costs

The takeaway is simple. Pixel 7 repairs tend to sit in the middle, while Pixel 8 and 9 models cost more because the parts do.

Public repair listings back that up. Recent examples include GeekPhone’s Pixel 10 pricing and a Pixel 7 battery quote from Fone Doctors, both sitting inside the same general range.

For supported devices on our side of the bench, we use the same logic when pricing phone battery replacement in Essex. The battery itself is only part of the bill. A proper repair also covers fitting, testing, safe adhesive removal, fresh seals where needed, and a warranty.

Why one Pixel quote is £55 and another is £95

Two battery quotes can look miles apart, even for the same model. That doesn’t always mean one shop is overcharging. It often means the repairs aren’t like for like.

A decent quote should tell you whether it includes:

A quality replacement battery, not the cheapest unbranded part available
Labour for careful removal and refitting
Post-repair testing
Resealing the phone after opening
A warranty, often around 12 months

Newer Pixels are more glued together than older phones, so labour matters. If the screen has to come off cleanly, the risk is higher and the job takes longer. That affects price.

Then there’s the condition of the handset. If the battery has swollen, the tech may need extra time to remove it safely. If the screen is already cracked, the quote may also reflect the added risk of opening it.

We’d also watch out for quotes that feel too tidy. A “battery replacement” price can sometimes leave out testing, waterproofing seals, or return postage. That’s why the lowest number on the page isn’t always the cheapest repair once the extras appear.

If you’re comparing professional repair with self-fix kits, iFixit’s Pixel battery replacement guide is useful. Their kits are often cheaper than labour-led repairs, but Pixels are not beginner-friendly phones to open.

Signs your Pixel battery is failing, not just having a bad day

Battery trouble doesn’t always show up as a flat phone. Sometimes it sneaks in slowly. Your Pixel starts getting warm doing very little, or it charges to 100% and then falls off a cliff by mid-morning.

Common signs include:

Fast drain, even on light use
Random shutdowns at 20% to 40%
Charging that feels unusually slow
The phone getting hot during simple tasks
Battery percentage jumping around
Slight lifting of the screen or back panel

Google Pixel smartphone on wooden desk shows low battery warning on angled screen, coffee mug and notebook nearby.

Before you assume the battery is finished, check for a rogue app, recent update issues, or poor signal. A phone struggling for signal can burn power all day. Google’s Pixel battery support advice is worth a look if you want to rule out the basics first.

If the screen is lifting or the back panel is separating, stop charging the phone and get it checked. That can point to a swollen battery.

We see similar symptoms all the time on other brands. An iPhone that drops charge by lunchtime or a Galaxy that turns off at 25% usually follows the same pattern. Once the cells wear out, software tricks won’t save it for long.

When replacing the battery makes sense, and when it doesn’t

For many people, a battery swap is the cheapest way to get another year or two from the phone. That’s especially true if the rest of the device still works well and the camera, screen and charging port are all fine.

It usually makes sense when:

The phone still does what you need
The battery is the main fault
The repair cost is a small fraction of a new handset
You want to avoid the faff of moving everything to a new phone

It makes less sense when the phone has several faults at once. A weak battery, cracked OLED screen, bent frame and charging issue can tip the sums the wrong way.

We had a customer in Essex recently with a Galaxy S21 that shut down at about 30% every day. The phone was in good condition otherwise, so a battery replacement brought it back into normal use. That’s common in the workshop. The same logic applies to Pixel owners weighing a repair against a new handset.

Gloved hands replace battery in disassembled Google Pixel smartphone on workshop bench with tools.

People often arrive here after searching iphone screen repair UK or iphone battery replacement UK, then realise the same value question applies across every brand. We hear the same from customers looking for cracked iphone screen repair, samsung phone repair UK, mobile phone repair UK, phone repair Essex and postal phone repair UK. If the device still has life in it, repair usually wins on cost.

For supported brands, our iPhone repairs in Harlow and by post and Samsung repairs in Essex follow that same practical approach. We price the repair against the real value of the phone, not wishful thinking.

How postal repair works if you’re nowhere near a shop

Postal repair is often the easiest option if your nearest repair counter is miles away. It also helps if you can’t be without the phone during a working day and need to plan around post and return.

For supported devices, our Essex phone repairs service includes tracked postage and a secure mail-in process. We also offer drop-in appointments in Harlow when that suits better.

The basics are straightforward:

Back up the phone and remove your case.
Pack it securely, include your order details, and add any needed passcode.
Send it tracked, then wait for diagnosis, repair and test before return.

Secure padded envelope with Google Pixel phone visible through semi-transparent window on post office counter with Royal Mail label and stamps nearby.

Across the wider UK market, many battery jobs are quoted at around 60 to 90 minutes in-store. Postal repairs take longer because of delivery time, but the repair itself is often quick once the handset is on the bench.

If you’re posting a phone for any repair, write down the exact fault. “Battery drains fast and shuts off at 27%” is far more useful than “battery bad”. That saves time and helps the tech test the right thing first.

Conclusion

The sensible Pixel battery replacement cost in the UK for 2026 sits between £49 and £99 for most models. What matters most is what’s included, the quality of the part, and whether the repair comes with proper testing and warranty cover.

A tired battery doesn’t always mean a tired phone. If the rest of the handset is sound, a battery replacement is often the cheapest way to keep it going without the cost of a new device.

If you’re comparing repair options right now, send us the model and symptoms. We’ll give you straight advice, and if it’s one of our supported repairs, we’ll help get it sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

featured-pixel-speaker-repair-after-a-drop-uk-fixes-that-wo-3e8d0a0c

Blog Mobile Phone Repair, Phone Repair, Repair my phone, repair phone near me

Pixel Speaker Repair After a Drop: UK Fixes That Work

Stephanie S May 4, 2026

One short drop onto paving slabs can leave a Pixel looking mostly fine but sounding dead. If your ringtone, videos, alarms or speakerphone stopped working straight after impact, the fault is often fixable.

We see this a lot at Repair My Crack. In most cases, a silent Pixel needs either a careful clean, a proper diagnosis, or a straightforward pixel speaker repair, not a full replacement phone. The trick is working out whether the drop caused a simple blockage, knocked something loose, or damaged the lower speaker area.

What usually breaks when a Pixel lands hard

A drop can affect more than one audio part at once. Most Pixel models use a bottom loudspeaker for media and speakerphone, plus an earpiece speaker near the top for calls. If the phone lands on a corner, the frame can flex and shock the speaker housing, the connector, or the lower board.

That means the fault can show up in different ways. Media may go silent, calls may sound tinny, or audio may crackle and cut in and out. If the problem started the moment the phone hit the ground, we treat hardware as the likely cause until testing proves otherwise.

Close-up of dropped Google Pixel 8 on repair bench shows cracked bottom speaker grille with debris; screwdriver and brush nearby.

The good news is that not every “no sound” fault means internal damage. Google still recommends a few basic checks first, including restarting the phone, checking Bluetooth and testing volume settings. Their own Pixel sound troubleshooting guide is a sensible place to start if the issue is fresh.

Still, after a drop, we often find one of these problems:

Debris packed into the speaker grille after the phone slid on the floor
A dented frame pressing against the speaker chamber
A loose connector from impact
Damage around the lower charging and speaker area
Water or dirt entering through a cracked edge after the fall

When the sound is distorted rather than fully gone, that often points to a partly damaged speaker module. When there is no sound at all, especially alongside charging trouble, we start thinking about the lower board or a broken connection.

Checks worth doing before you book a Pixel speaker repair

Before you send the phone in, spend five minutes on the basics. These steps rule out the easy stuff and help us diagnose the fault faster if you do need repair.

Restart the phone fully. A hard reboot can clear a temporary audio route error after a shock.
Turn Bluetooth off. Pixels sometimes keep sending sound to earbuds, car audio or a speaker you forgot about.
Test three things. Play a video, trigger a ringtone, and make a call on speakerphone. This shows whether one speaker or both are affected.
Check Sound and Do Not Disturb settings. Make sure media, ringtone and alarm sliders are up.
Inspect the speaker grille and USB-C port. Lint, grit and pocket dust can block sound or confuse audio accessories.

If you can hear callers through the earpiece but videos stay silent, the lower loudspeaker is the main suspect. If both speakers seem dead, the issue may be wider.

Gloved hands brush speaker grille of Google Pixel phone on workshop table with nearby parts.

Cleaning needs care. Use a soft dry brush, a microfibre cloth, or a little air from a blower. Keep moisture away, and don’t force anything into the mesh.

Don’t poke the grille with a pin or needle. We see that turn a blocked speaker into a torn mesh or punctured speaker far too often.

If the phone still works but audio stays missing, try Safe Mode. That helps rule out apps that hijack sound. Google also advises checking for system updates, because audio bugs do crop up from time to time. We leave factory resets until last, because a drop-related fault is usually physical, not software.

For extra fault-finding, the iFixit Pixel no-sound guide is useful for separating app issues from speaker or board damage. We still wouldn’t recommend opening a modern Pixel at home unless you’re set up for it. The screens, seals and battery adhesive make it easy to turn one repair into three.

How to tell whether the speaker, earpiece, or board took the hit

This quick table shows what the symptoms usually point to.

Symptom	Likely fault	Best next step
Videos, music and alarms are silent, but calls at the ear still work	Bottom loudspeaker blocked or damaged	Clean safely, then test for speaker replacement
Calls sound faint at the ear, but speakerphone works	Earpiece speaker or top mesh issue	Check top grille, then book diagnosis
Sound crackles, then cuts out after movement	Loose connection or impact damage	Professional internal inspection
No sound at all, plus charging trouble	Lower board or charging-area damage	Book repair, because both faults may share the same area
Sound only works through Bluetooth or USB-C audio	Routing issue, port debris, or board fault	Disable Bluetooth, clean port, test again

The main pattern is simple. The more faults you have, the less likely a quick clean will sort it.

We also watch for signs outside the audio. A bent corner, a lifted screen, back glass movement, or poor charging after the drop all make hardware damage more likely. In those cases, a proper inspection matters more than another restart.

A recent Pixel repair from our Essex workshop

Not long ago, a customer from Chelmsford brought in a Pixel 7 that had bounced out of a pocket onto block paving. The screen survived, which felt lucky, but media sound vanished and speakerphone was barely audible.

When we opened it up, the lower speaker housing had taken the hit. Grit had also packed into the mesh, and the frame near the corner was slightly knocked in. We replaced the loudspeaker module, cleaned the area, tested charging and audio, and the phone went back sounding normal again.

That sort of job is common for us. If you’re local, our phone repair Essex service makes it easy to book. If you’re further away, the process works just as well by post.

Repair costs in the UK, and when repair makes sense

For a Pixel speaker fault after a drop, UK repair prices usually depend on the model and what else was damaged. A simple speaker clean and diagnosis may be modest, while a full speaker replacement often sits around £45 to £95. If the charging assembly, frame or board area is also damaged, the quote can rise from there.

We always prefer diagnosis first. That matters because what looks like a speaker issue can turn into a charge-port or lower-board issue once the phone is opened and tested. We give exact quotes once we’ve confirmed the fault.

A lot of customers first find us after searching for “iphone screen repair UK” or “iphone battery replacement UK”, then ask whether we handle Pixel audio problems too. We do, and the same workshop also sees searches for “cracked iphone screen repair”, “samsung phone repair UK”, “phone repair Essex”, “mobile phone repair UK”, and “postal phone repair UK” every day.

If you’re not near Harlow, our mail-in phone repair UK service covers customers across the country. We use tracked Royal Mail, aim to start work as soon as the device arrives, and test everything before return. That makes it handy for people who need a proper fix without trekking to a shop.

Repair usually makes sense when the phone still powers on, the screen is mostly intact, and the only real issue is sound. It makes less sense if the frame is badly bent, the OLED is failing, the battery is swelling, and the board has taken a hard hit as well. In those cases, we’ll say so plainly.

We also carry out iPhone repairs in Harlow and plenty of Samsung work, so we’re used to comparing repair costs against replacement value. The same rule applies across brands: fix the part that failed, use quality parts, and don’t throw money at a phone that has too many stacked faults.

Getting your Pixel ready for postal repair

If you do send it in, a few small steps save time and hassle:

Back up the phone if the screen still works
Remove the case and any SIM tray accessories you don’t want to post
Include your order number in the parcel
Add the passcode if testing needs it
Pack the phone snugly so it can’t rattle around in transit

That helps us get from intake to diagnosis without the usual faff.

Conclusion

A Pixel that loses sound after a drop usually isn’t beyond saving. In our experience, the fault is often a blocked grille, a damaged loudspeaker, or impact around the lower board, and a proper pixel speaker repair is usually far cheaper than replacing the phone.

If the basic checks don’t bring the sound back, don’t keep prodding the mesh or hoping the next reboot will do the trick. Book it in, get it tested properly, and let us tell you whether it’s a quick fix or a wider impact fault.

If you’re stuck with a silent Pixel right now, you can book online and send it to us from anywhere in the UK, or arrange a local repair in Essex. We’ll diagnose it, quote clearly, and get it sorted as quickly as we can.

James Waterston, Device Repair Specialist at Repair My Crack

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.